ISO-5167 Crack [Win/Mac] [April-2022]

Designed for the oil and gas industry, ISO-5167 is an easy-to-use software application for Windows that can help you give shape to orifice plates of a design as well as to locate the pressure drop of a flow (or vice versa). Quick setup and simple-to-navigate GUI From the installation procedure we can clearly see that ISO-5167 is outdated, and this aspect is also indicated by its interface, made from a normal window with a simple aspect that reminds of the Windows 95. Nevertheless, it is very easy to navigate. Select properties to make calculations You can perform a new calculation by setting a title, type (gas or liquid orifice, restriction orifice – gas or liquid), along with fluid: natural gas, air and oxygen (for gas), crude oil, water, methanol, monoethylene glycol, diethylene glycol or triethylene glycol (for liquid). In addition, you can pick the calculation type (orifice size, flow rate or pressure drop), tapping mode (flange, D and D/2, corner, orifice and pipe material (carbon steel, stainless 300- or 400- series, other), together with the operating conditions (temperature, pressure, pipe diameter, downstream orifice pressure, flow rate) and natural gas or oil properties. View, examine, save and print results The results are shown instantly after clicking a button, and you can go back to make any modifications and recalculate data. ISO-5167 lets you print information, save it to file, as well as to set the measurement unit to customary or metric. There are no other noteworthy options available here. Evaluation and conclusion We have not come across any issues throughout our evaluation, since the app did not hang, crash or pop up error messages. It has a good response time to commands and works well on later operating systems, although it has not been updated for a while. Excluding its dull interface, ISO-5167 serves its purpose and can be easily handled by those looking to make gas or oil orifice calculations.







ISO-5167 [Win/Mac] [Updated]

ISO-5167 Cracked Version is a powerful software for performing orifice sizes, calculation of restriction orifice sizes, calculation of pressure drop and size of orifice plate design – for the oil and gas industry. ISO-5167 can be used as a standalone application or installed together with ISO-5167 Analyst Pro. ISO-5167 is the oil and gas industry standard for gas orifice plate design. ISO-5167 can be used for gas orifice plate design, calculation of restriction orifice sizes, calculation of pressure drop and size of orifice plate design. ISO-5167 can also be used for hot water pipelines, feedwater piping, steam lines, and sewer lines. Install ISO-5167: To install the standalone ISO-5167 please click: “Add this Program to your computer” Install on a Windows® XP or later operating system. Download ISO-5167: Free download for ISO-5167, check: “Download ISO-5167″ – around 1.5 MB. Report an issue: Have a problem, comment, question, suggestion, or complaint? Have you found a bug? Please write to us: Thanks! mdob Apr 12th, 2015 Does this work for 1/4” flange diameters? X Apple Apr 12th, 2015 would you consider changing it for Mac? J jts Apr 11th, 2015 Works for me. Thanks a lot! Hey I have installed all the 3 products you mentioned and while running ISO-5167 an Error pops up, what to do? The same error pops up when I try to run ISO-5167 Analyst. Will the missing database make the program work or should I reinstall the whole thing? Any suggestions? I don’t want to loose the purchased copy of this product. of various photoelectric detection elements and the like constituted by a semiconductor integrated circuit has been proposed, and a filter having a switching function of selecting a light flux having a desired wavelength is also well-known. Further, a type of color separation filter having a bandpass function (hereinafter referred to as the first type of the color separation filter) as disclosed in Japanese Unexamined Patent Publication (Kokai) No. Hei 2-232647 is well-known. According to the first type of

ISO-5167 Torrent

ISO-5167 Crack Mac is a simple software to predict the oil and gas orifice size, and print out the data together with the required analysis of the orifice [size]and [pressure drop]concern. It is specifically designed for orifice plate(s) of the wellhead, transmission pipe, and equipment, since its objectives are to predict the orifice dimensions required to guarantee oil and gas flow. It works with both gas and oil. The program will calculate the orifice, restrictor, opening, orifice plate measurement for the various pipe sizes, pressure drop, well-head pressure, and operating conditions. This software does not just measure the orifice size; it also calculates the required quantities, namely pipe opening, piping connection, restrictor size, orifice plate dimensions and conditions. The features of this software include the ability to calculate the orifice size and piping dimensions, as well as pipe system pressure drop, orifice plate pressure drop and orifice plate leakage. The software is able to perform calculations for both corrosion and non-corrosion orifice plates. The calculations are done based on pipe size, pressure drop, orifice size, orifice plate leakage. The program can calculate a small orifice plate orifice dimension, as well as the pipe size. Pipe configuration and location are also addressed. You can quickly print or save data to file, with the ability to view the orifice dimensions along with piping information on both the orifice plate and piping, as well as piping pressure drop and orifice plate pressure drop. The software is easy to use and has a user-friendly GUI. It is easy to navigate and will save your time. The software will run on Windows 2000, XP or newer operating systems. There is no installation or registration required, and it is free to use. ISO-5167 Serial Key System Requirements: Windows 2000 Windows XP Review ISO-5167 The software allows you to calculate the pipeline pressure drop and pipe sizing information. It has the ability to calculate the orifice size and piping dimensions. It calculates the required quantities, namely pipe size, piping connection, restrictor size, orifice size and conditions. ISO-5167 Screenshot Review ISO-5167 This software is specifically designed for orifice plates of the wellhead, transmission pipe, and equipment. Its objectives are to calculate the orifice dimensions 3a67dffeec

ISO-5167 Crack+

ISOLab (ISO Standard) is a complex software application that aims to assist in the development of processes for the creation of orifices. This product is specific to the International Organization for Standardization (ISO), a non-profit making international standards organization based in Geneva, Switzerland, and therefore is intended primarily for the industry. With most of the features available in the US version of the software, ISO-5167 has a graphical interface and can be used on Windows systems, including Windows 7. ISO-5167 is more of a comprehensive calculation orifice tool than a standard orifice design tool. It is very versatile and can do a lot of very detailed calculations if set up properly. It is designed for the oil and gas industry, but can be used for just about any application. ISO-5167 includes a number of features such as allowing the user to change the measurement unit for both the diameter and flow rate, the ability to simulate different sizes of orifice, finding the natural orifice of a flow line, various sizes of resizing orifice, resizing internal orifices and calculation of erosion effects on orifices due to the fluid flow. It has two separate windows. One window is used for the calculation and the other provides the user with an interface to display the result of the calculation which will be the orifice plate design. This section is to demonstrate the functionality of ISO-5167 and how it is used. During testing, we used several of the built in calculations and examples from the menu to show the process. How to Use ISO-5167: Please follow these steps: Launch ISO-5167 and you will be prompted to select a save directory. Choose a directory of your choice on your hard drive. For example, my current directory is: C:\ISOLab. Make sure that the ISO_5167.exe is in the directory you have selected. On the left side of the screen click on the title of the desired window. From the left side of the window click on the icon for the desired calculation or model (for example orifice). On the left side of the window click on the icon for the desired property to be measured. Set the starting (X-axis) and ending (Y-axis) values for the property to be measured. To add or remove orifice size from your measurement unit, double click on the new icon on the left of the window. Click on the left side of the window to

What’s New In?

Energy is transformed into work through the work of an object. Part of the energy is used to generate the force that causes the object to move. This is called power. The power of an object can be measured in terms of a certain quantity of work. In the work-energy equivalence the product of an object’s mass and speed, called kinetic energy, and its displacement, called distance, is equal to the energy imparted to the object. The work equivalent to this quantity of energy is called power. The force necessary to produce a quantity of work W through an object is the product of mass and speed, called power. The work-energy equivalence is expressed as P=W/2. The measurement unit for power is kN·m·s−2. ISO-5167 Benefits: – Personalization in workflows – Ensure data consistency – External data import – Job scheduling support – Extensible for open standards – Confirmable and auditable ISO-5167 Features: – Calculates the orifice size, flow rate, pressure drop and other characteristics – Calculates orifice sizes from 2.2 to 4.7 millimeters – Calculates flow rates from 1.3 to 100 liters per second – Calculates pressure drops from 0 to 1000 psi – Calculates flow rates from 7.5 to 25 000 kg/s – Allows for the processing of analytical databases – Analyzes the properties of the fluid and calculates characteristics for the liquids and gases – Calculates flow rates for liquid and gas orifice plates and restrictions – Provides a graphical report of the orifice size, flow rate, pressure drop and other characteristics – Contains decimals, whole numbers and scientific notation – Calculates data with any number of decimal places – Calculates data for dimensions, in kg/m3 (SI), mm/m, psi/MPa and l/s ISO-5167 Versions: – 1.0.1595 – 1.1.1229 – 1.2.4898 – 1.3.2393 – 1.4.1934 – 1.5.1656 – 1.6.1046 – 1.7.564 – 1.8.3388 – 1.9.2018 – 1.9.2098 – 1.9.2188 – 1.9.2282 – 1

System Requirements For ISO-5167:

1. Windows XP or later with Service Pack 3 or later 2. Microsoft Silverlight 3 (for fullscreen mode) 3. DirectX 9.0 or later 4. 3D Graphics Adapter 5. Minimum of 512MB memory 6. Minimum of 100MB hard disk space 7. 15 minutes 8. Internet connection 9. 50MB 10. World of Tanks gameplay.The question: Do you have a knowledge management strategy? What is a knowledge

Please follow and like us:
Aggiungi ai preferiti : permalink.

I commenti sono chiusi.